How to Create Bugs With Your Creepy Crawlers Bug Maker
Creating bugs with your Bugmaker Oven is simple and easy. By attaching the foot pedal to the Bugmaker, you can control the temperature of the oven, as well as rotate it. If you want to create bugs from spiders, then you need to place the stamp on the spider first and turn the stamp until it stops moving.
When the spider stops moving, you can use the stamp to bring it back into position. The stamp is made up of a series of swipes that are placed at intervals. Place the spider in between each swipe to create bugs from spiders.
You can place the stamp on a flat surface and make as many stamps as you want to if you so desire. Make sure that you use a good quality stamp, as it is easily damaged by water or grease. Make sure to use wax-based lubricant, or oil, instead.
Make sure that you are not placing the stamp on a flat surface that is rough. The stamp will easily slide across the surface of the stamp pad, causing the stamp to become damaged. Try placing the stamp on a small marble for this step.
Now that you have a stamped spider, you can use the stamp again to stamp out an image of a fly. First, stamp the image onto the spider. Place the stamp onto the stamp pad, and turn the stamp counter-clockwise to allow the stamp to be imprinted onto the spider.
Finally, you can remove the stamp from the spider, and place it on the stamp pad. Apply another stamp to the stamp pad, and turn the stamp clockwise to allow the spider to be imprinted onto the stamp. When all of the stamps are removed, turn the stamp counterclockwise again to allow the stamp to be removed from the pad.
Place the stamps on a flat surface, and use the stamping tool to print the image onto the stamp. Place the stamp on a marble, or card, and place the stamp image onto the stamp. Press down firmly to create the image, and place the stamp over it.
You can now place the stamp on the stamp pad and turn the stamp counterclockwise to allow the stamp to be imprinted onto the pad. Repeat this process for all of the stamps on the pad. After a few stamps have been printed, you can remove the stamp from the pad and move it to a place where it can be used for decoration.